Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: Plug in resistorDescription: Res Wirewound 82Ω 5% 25W ±75ppm/℃ Conformal AXL Thru-Hole Box26451+$57.981910+$55.4609100+$55.0071250+$54.6542500+$54.09961000+$53.84752500+$53.49465000+$53.1920 -
![]()
Category: Plug in resistorDescription: Res Wirewound 6.8Ω 5% 11W ±75ppm/℃ Conformal AXL Thru-Hole Box58355+$23.143850+$22.1547200+$21.6009500+$21.46241000+$21.32392500+$21.16575000+$21.06687500+$20.9679 -
![]()
Category: Plug in resistorDescription: RWM 8x45 Series 11 W, axial enameled wire wrapped power resistor, axial lead, fire-resistant power rating at 70 ° C | 9.5W ------------------------------------------------------------------------------------------------------------ C Body Length | 45.8 mm Body Diameter | 9.4 mm Lead Length | 25 mm min. Lead Diameter | 0.8 mm ### CECC 40201-001//002, NFC 83210-001 CECC design: RB58 small high-power resistor series, suitable for harsh environments. Their high stability and reliability make them particularly suitable for protecting circuits. The resistance wire element is wound on a high-purity ceramic substrate and uses a fully welded top cover and lead structure to provide considerable strength and damage resistance. The enamel protective coating has a resistance to all normal cleaning solvents for printed circuit boards. Application instructions. The distance between the bending point of the output end and the shell should not be less than 1.5mm. It is recommended that the minimum bending radius be 1mm. In order to achieve full load rated power consumption, the distance between the end welding and the main body should not be less than 4mm. When cool, enamel has excellent insulation resistance; But as the temperature rises, the resistance coefficient will decrease. Therefore, if a resistor operates at or near maximum temperature, it cannot be classified as an insulation resistance and should not come into contact with any conductive material.29711+$75.724110+$72.4317100+$71.8391250+$71.3781500+$70.65381000+$70.32462500+$69.86375000+$69.4686 -
![]()
Category: resistanceDescription: Res Thick Film 4.7KΩ 5% 200W ±150ppm/℃ SOT-227B Screw Terminal Bolt-On Box32681+$363.620810+$354.135050+$346.8626100+$344.3331200+$342.4359500+$339.90641000+$338.32542000+$336.7445 -
![]()
Category: Classification of electronic componentsDescription: Res Thick Film 22 Ohm 5% 200W ±150ppm/°C SOT-227B Screw Terminal Bolt-On Box40141+$343.303810+$334.348050+$327.4819100+$325.0937200+$323.3026500+$320.91441000+$319.42182000+$317.9291 -
![]()
Category: Chip ResistorDescription: 100W / 200W Thick film power resistor - RTOP series Vishay Sfernice RTOP series thick film non inductive resistor, using SOT-227B package resistor installed on the heat sink, allows dissipation of (RTOP 100) or 200W (RTOP 200) at 25 ° C Power consumption at 25 ° C: | 100 W (RTOP 100); 200 W (RTOP 200) --- | --- Tolerance: | ± 5% Temperature coefficient: | R 1 Ω: ± 150 ppm/° C Maximum service voltage: | 1500 V Effective voltage Thermal resistance: | 1 ° C/W (RTOP 100); 0.5 ° C/W (RTOP 200) Shell: | SOT-227B Connection: | Use screws M4 x 6 size - Sfernice series| RCH 5 | RCH 10 | RCH 25 | RCH 50 L | 16.6 | 19 | 28 | 50 W | 9 | 11 | 14 | 15.5 H | 16.4 | 20.6 | 27.5 | 29.4 P | 10.2 | 12.7 | 18.3 | 33 F | 11.3 | 14.3 | 18.3 | 39.7 T | 12.5 | 15.9 | 19.8 | 21.4 S | 5.3 | 5 | 7.7 | 8 Ø D | 2.4 | 2.4 | 3.2 | 3.2 | M2 | M2 | M3 | M3 Main Features - Overload Duration| RCH25 | RCH50 | BDS100 | BDS250 1 s | 375W | 750W | 200W | 1500W 2 s | 300W | 600W | 150W | 1250W 5 s | 125W | 250W | 125W | 1000W 10 s | 75W | 150W | 100W | 750W For every one degree increase in ambient temperature above 25 ° C, the allowable overload is reduced by 1%. The main feature table is only applicable to resistors appropriately installed on heat sinks, with a thermal resistance of 1 ° C/W at rated powers of 25 and 50W, 0.7 ° C/W at rated power of 100W, and 0.28 ° C/W at rated power of 250W. This data is only valid when hot oil grease is used and the resistor is correctly tightened by the mounting screw. Tightening torque - RCH25 | RCH50 | BDS100 | BDS250 0.7Nm | 1Nm | 2Nm | 2Nm47891+$700.329410+$675.756450+$672.6848100+$669.6132150+$664.6986250+$660.3983500+$656.09801000+$651.1834 -
![]()
Category: resistanceDescription: 100 W Thick film power resistor Vishay Sfernice RPH100 series 100W thick film power resistor. This new housing has been developed as an extension of the RCH series. It is non inductive and can respond sensitively to overload and low radiation of the housing. Power consumption at 25 ° C: | 100 W --- | Power consumption at 25 ° C in air: | 10W Dielectric stiffness: | 5000 V Tolerance: | ± 5% Temperature coefficient: | ± 300 ppm/° C (0R15 and 0R47) ± 150 ppm/° C (other values) Maximum service voltage: | 1900 V Effective value Thermal resistance: | 0.55 ° C/W Operating temperature: | -55 ° C →+125 ° C Size - Sfernice series| RCH 5 | RCH 10 | RCH 25 | RCH 50 L | 16.6 | 19 | 28 | 50 W | 9 | 11 | 14 | 15.5 H | 16.4 | 20.6 | 27.5 | 29.4 P | 10.2 | 12.7 | 18.3 | 33 F | 11.3 | 14.3 | 18.3 | 39.7 T | 12.5 | 15.9 | 19.8 | 21.4 S | 5.3 | 5 | 7.7 | 8 Ø D | 2.4 | 2.4 | 3.2 | 3.2 | M2 | M2 | M3 | M3 Main Features - Overload Duration| RCH25 | RCH50 | BDS100 | BDS250 1 s | 375W | 750W | 200W | 1500W 2 s | 300W | 600W | 150W | 1250W 5 s | 125W | 250W | 125W | 1000W 10 s | 75W | 150W | 100W | 750W For every one degree increase in ambient temperature above 25 ° C, the allowable overload is reduced by 1%. The main feature table is only applicable to resistors appropriately installed on heat sinks, with a thermal resistance of 1 ° C/W at rated powers of 25 and 50W, 0.7 ° C/W at rated power of 100W, and 0.28 ° C/W at rated power of 250W. This data is only valid when hot oil grease is used and the resistor is correctly tightened by the mounting screw. Tightening torque - RCH25 | RCH50 | BDS100 | BDS250 0.7Nm | 1Nm | 2Nm | 2Nm38891+$408.998710+$398.329150+$390.1491100+$387.3039200+$385.1700500+$382.32481000+$380.54662000+$378.7683 -
![]()
Category: Classification of electronic componentsDescription: Res Thick Film 15Ω 10% 750W ±150ppm/℃ Ceramic Screw Terminal Flange Mount17221+$521.062710+$507.469850+$497.0485100+$493.4237200+$490.7051500+$487.08041000+$484.81492000+$482.5494 -
![]()
Category: Classification of electronic componentsDescription: Res Thick Film 18Ω 10% 750W ±150ppm/℃ Ceramic Screw Terminal Flange Mount Box83661+$1522.301010+$1508.461925+$1501.542450+$1494.6228100+$1487.7033150+$1480.7837250+$1473.8642500+$1466.9446 -
![]()
Category: resistanceDescription: Potentiometer, 10K, 1W, 20%, panel installation64691+$50.243310+$47.3605100+$45.2189250+$44.8895500+$44.56001000+$44.18942500+$43.85995000+$43.6540 -
![]()
Category: potentiometerDescription: Res Cermet POT 50KΩ 20% 1W 1(Elec)/1(Mech)Turn 6mm (12.5 X 13.1mm) Solder Lug Panel Mount Box79001+$40.266110+$37.9558100+$36.2395250+$35.9755500+$35.71141000+$35.41442500+$35.15035000+$34.9853 -
![]()
Category: potentiometerDescription: 12mm P11 Series metal ceramic track potentiometer, with metal body and shaft panel installation, welded pin connection single or bilinear and logarithmic model insulation resistance>1000G Ω @ 500V DC environmental protection level 55/125/56 shell level IP64 linear footprint rated 1W, recorded footprint 0.5W Technical parameters - Electrical rotation: | 270 °± 10 ° Mechanical rotation: | 300 °± 5 ° Dielectric strength (RMS): | 1500V AC shaft diameter: | 6mm insulation resistance |>1000G Ω at 500V DC temperature coefficient: | ± 100ppm/° C Environmental protection level: | 55/125/56 shell level: | IP64 # # Standard CECC 41301-004; NFC 83253； LNZ, GAM T1 # # # comes with metal lock washers and nuts30601+$95.739810+$91.5772100+$90.8279250+$90.2452500+$89.32941000+$88.91312500+$88.33045000+$87.8309 -
![]()
Category: Classification of electronic componentsDescription: 7.15Ω ±1% 0.6W ±50ppm/℃ Φ2.50mm980320+$0.234950+$0.2175100+$0.2088300+$0.2018500+$0.19661000+$0.19315000+$0.189710000+$0.1862 -
![]()
Category: resistanceDescription: 412Ω ±1% 0.6W ±50ppm/℃ Φ2.50mm556420+$0.234950+$0.2175100+$0.2088300+$0.2018500+$0.19661000+$0.19315000+$0.189710000+$0.1862 -
![]()
Category: Classification of electronic componentsDescription: Through hole resistor, 3.48 ohm, MRS25 series, 600 mW, ± 1%, axial lead, 350 V857320+$0.098650+$0.0913100+$0.0876300+$0.0847500+$0.08251000+$0.08105000+$0.079610000+$0.0781 -
![]()
Category: Plug in resistorDescription: 280kΩ ±1% 0.6W ±50ppm/℃ Φ2.50mm368620+$0.126950+$0.1175100+$0.1128300+$0.1090500+$0.10621000+$0.10435000+$0.102510000+$0.1006 -
![]()
Category: Classification of electronic componentsDescription: 2.37Ω ±1% 0.6W ±50ppm/℃ Φ2.50mm883820+$0.117550+$0.1088100+$0.1044300+$0.1009500+$0.09831000+$0.09665000+$0.094810000+$0.0931 -
![]()
Category: Plug in resistorDescription: 1.65Ω ±1% 0.6W ±50ppm/℃ Φ2.50mm167220+$0.234950+$0.2175100+$0.2088300+$0.2018500+$0.19661000+$0.19315000+$0.189710000+$0.1862 -
![]()
Category: Classification of electronic componentsDescription: 1.78Ω ±1% 0.6W ±50ppm/℃ Φ2.50mm497820+$0.117550+$0.1088100+$0.1044300+$0.1009500+$0.09831000+$0.09665000+$0.094810000+$0.0931 -
![]()
Category: Classification of electronic componentsDescription: 9.53kΩ ±1% 0.4W ±50ppm/℃ Φ1.60mm280420+$0.098650+$0.0913100+$0.0876300+$0.0847500+$0.08251000+$0.08105000+$0.079610000+$0.0781 -
![]()
Category: Classification of electronic componentsDescription: 8.66kΩ ±1% 0.4W ±50ppm/℃ Φ1.60mm174920+$0.098650+$0.0913100+$0.0876300+$0.0847500+$0.08251000+$0.08105000+$0.079610000+$0.0781 -
![]()
Category: Classification of electronic componentsDescription: 78.7Ω ±1% 0.4W ±50ppm/℃ Φ1.60mm693820+$0.098650+$0.0913100+$0.0876300+$0.0847500+$0.08251000+$0.08105000+$0.079610000+$0.0781 -
![]()
Category: Classification of electronic componentsDescription: 30.1Ω ±1% 0.4W ±50ppm/℃ Φ1.60mm106720+$0.098650+$0.0913100+$0.0876300+$0.0847500+$0.08251000+$0.08105000+$0.079610000+$0.0781 -
![]()
Category: Classification of electronic componentsDescription: 2.26kΩ ±1% 0.4W ±50ppm/℃ Φ1.60mm727620+$0.156650+$0.1450100+$0.1392300+$0.1346500+$0.13111000+$0.12885000+$0.126410000+$0.1241 -
![]()
Category: Classification of electronic componentsDescription: 16.9kΩ ±1% 0.4W ±50ppm/℃ Φ1.60mm464820+$0.156650+$0.1450100+$0.1392300+$0.1346500+$0.13111000+$0.12885000+$0.126410000+$0.1241 -
![]()
Category: Classification of electronic componentsDescription: Aluminum electrolytic capacitor, 470 µ F, 200 V, 259 PHM-SI Series, 3000 hours @ 105 ° C, ± 20%, quick connect, snap in type31225+$26.006850+$24.8954200+$24.2730500+$24.11741000+$23.96182500+$23.78405000+$23.67287500+$23.5617 -
![]()
Category: Classification of electronic componentsDescription: Vishay Aluminum electrolytic capacitor 259 PHM-SI series 400V DC 120 μ F through-hole MAL225956121E3, ± 20% tolerance, 1.08 Ω (equivalent series)745810+$11.7480100+$11.1606500+$10.76901000+$10.74942000+$10.67115000+$10.57327500+$10.494910000+$10.4557 -
![]()
Category: Classification of electronic componentsDescription: Aluminum electrolytic capacitor, 150 µ F, 400 V, 259 PHM-SI Series, 3000 hours @ 105 ° C, ± 20%, quick connect, snap in type82735+$23.918350+$22.8962200+$22.3238500+$22.18071000+$22.03762500+$21.87405000+$21.77187500+$21.6696 -
![]()
Category: Classification of electronic componentsDescription: Aluminum electrolytic capacitor, 470 µ F, 250 V, 259 PHM-SI Series, 3000 hours @ 105 ° C, ± 20%, quick connect, snap in type85815+$32.273350+$30.8941200+$30.1217500+$29.92861000+$29.73562500+$29.51495000+$29.37707500+$29.2390 -
![]()
Category: Classification of electronic componentsDescription: Aluminum electrolytic capacitor, 220 µ F, 450 V, 259 PHM-SI Series, 3000 hours @ 105 ° C, ± 20%, quick connect, snap in type53755+$17.176850+$16.4427200+$16.0317500+$15.92891000+$15.82612500+$15.70875000+$15.63537500+$15.5619
